home Windows

What to do if the iPad takes a long time to charge and quickly discharges? Tips on how to quickly charge an iPad iPad is charging slowly, what to do

If you are the happy owner of an iPad, then sooner or later you will definitely be faced with the question of how to properly use and charge the battery on your tablet.

Let's try to figure out together how to prolong the work of your device's heart.

Battery usage rules

iPad battery - how to properly use and charge your iPad

In order to extend the battery life, you don’t need a lot of knowledge, you just need to follow a few simple rules:

Do not use or store iPad at temperatures below 0 or above +35 degrees. The optimal temperature for operating and storing the device is from 0 to 30 degrees.
Do not leave your iPad without a charge for a long period of time (1-2 weeks), otherwise it may not turn on.
Be sure to use your tablet, do not let it sit idle for a long time with a full charge, this way you can preserve the battery capacity.
Discharge and charge your iPad completely, at least once a month.
Charge your device properly.

These are the five basic rules that you should consider when using your tablet.

How to charge an iPad

The tablet can be charged using an adapter that connects to a 220 W outlet (usually included with the device) or from a computer via a USB cable.

Charge iPad via adapter. In this case, everything is simple, connect the iPad to the adapter, then plug it into a power outlet and wait for the device to be fully charged. This usually takes about 6 hours.

How to charge an iPad - charging an iPad using a 220W adapter

How to charge iPad from a computer. Everything is just as simple, but there is one “but”: you can charge the iPad via USB 2.0 only in standby mode (i.e., off) since the USB port does not have enough power. Charging using this method can take up to 12 hours, and your computer must be turned on.

How to charge iPad - charging iPad from computer

How to charge ipad correctly

According to Li-ion battery experts, it is better to charge the battery until it is completely discharged. The remaining charge can be like 10% , so 40% , but try not to allow a smaller discharge. My words can be confirmed by a message on the iPad at a time when the charge remains less than 20%.

I would like to draw your attention to the fact that there is a rumor that overcharging the battery has an extremely negative effect on its condition, but this is not entirely true. All well-known manufacturers have long been integrating a special circuit into the battery, which allows it to be protected from overcharging.

Also earlier, in metal hydride batteries, the effect was observed "memory" incomplete charging, but in current generation batteries this effect is very insignificant.

iPad battery capacity

On iPad 3 contains two batteries connected to each other with a common capacity 24.8 Wh., which is approximately 6,613 mAh. The operating time of a tablet with such a battery is approximately 10 hours.
On iPad 4 this capacity has been increased by almost 2 times and thus equal 42 Wh, which corresponds to 11,666 mAh. Despite the large battery capacity, its operating time is about 10 hours, and all due to the fact that the insides of the device consume much more energy.

How to save iPad battery power and extend its life?

Let's take a point-by-point look at how you can save battery power when using a tablet.

Display. This is the most voracious element that consumes the device’s charge the most. By using brightness settings you can reduce this consumption. The brighter the display, the greater the charge consumption; the dimmer, the less. Thus, your task is to adjust this parameter to suit your eye. To do this you need to go to “Settings” - “Brightness”. A slider will appear in front of you, by moving which you can change the value of this parameter.

Stay tuned for firmware updates. Try to update the firmware as a new version is released, as the company is constantly working to improve certain functions that in one way or another may affect charge consumption.

Turn off the 3G adapter. Turn off this adapter when you don’t need it at all or there is an alternative to wi-fi. It (3G) consumes too many resources.

Turn off the Wi-Fi adapter. This will allow you to save some of the charge. To turn off Wi-Fi, go to “Settings” - “Wi-Fi” and change the switch position to "Off" (“Off”)

Turn on Airplane Mode. If you are out of range 3G or Wi-Fi signals, then use the function "Air mode"– this will allow you to increase your battery usage savings. Go to "Settings", in the left menu, the very first item in the list will be "Airplane mode", change the switch to "On" (“On”).

Turn off "Notifications". Over time, the iPad becomes overgrown with applications, some of which constantly send notifications to your screen. By turning them off, you can extend the battery life of your iPad. Let's go to “Settings” - “Notifications” and turn off everything we don't need.

Disable Location Services. Pay attention to those programs that are constantly interested in your location. Disable some of them that do not need this function at all. Let's go to “Settings” - “Location services”.

Turn off Bluetooth. “Settings” - “General” - “Bluetooth” - “Off”.

Turn on auto-lock mode. Be sure to enable this mode. Set the values to the minimum interval of “2 minutes.” “Settings” – “General” – “Auto-Lock” – “Auto-Lock”. This way we will force the iPad to turn itself off when we stop using it.

Turn off unnecessary sounds. For example, the sounds of the keyboard, turning the device on and off. Let's go to “Settings” - “General” - “Sounds” - “Sounds” and turn off everything unnecessary.

Turn off automatic mail checking and delete mailboxes you don't use. “Settings” – “Mail, Contacts, Calendars” – “Fetch New Data”, here we change the position "Push" on "Off" (“Off”) and set the boot option "Manual".

If you have questions, comments or additions, leave them in the comments.

Tricky question. How many hours does your iPad charge?

How long should a car battery be charged? According to statistics, the car battery rarely causes problems to the owner. However, situations when you need to drive, but the car cannot be started because the battery is dead, arise quite often. Therefore everyone

Video reviews and comparisons of gadgets

Home page » How long does it take to charge an iPad 3

How many The car battery must be charged.

According to statistics, the car battery rarely causes problems to the owner. However, situations when you need to drive, but the car cannot be started because the battery is dead, arise quite often. Therefore, every car owner must be able to charge the device.

So how and How many time battery needs to charge car? The general rules for charging any battery are as follows:

in a room where charging car battery, there must be good ventilation; there should be no open fire nearby; The battery must be thoroughly cleaned of dirt, and the ventilation ducts in its case must be cleaned using a needle or similar tool.

There are two ways to charge a car battery: by maintaining a constant voltage or by maintaining a constant current. Direct current can be used to charge maintained and low-maintenance batteries, into which distilled water can be added if necessary. So how many amps can be applied to the terminals without causing harm?

The fact that it is fully charged will be indicated by boiling electrolyte. On average, it takes 10-12 hours to charge a car battery. If you increase the amperage, the charging time will decrease by several hours, but this will negatively affect the condition of the lead plates, and, consequently, the service life of the battery. This is especially true for lead-antimony batteries.

Can I charge my iPad using an iPhone charger?

Most of those who tried to use Apple technology became its fans and constantly purchased...

Why does it take a long time to charge an iPhone iPad smartphone tablet?

Let's look at the reasons for prolonged time charge smartphones tablets ipad iPhone we measure the charge current with different...

With a deep discharge, the amperage must be reduced to 5% of the capacity, the charging voltage must also be set lower, about 12-13 V. After some time, the current strength will begin to increase, you must ensure that it does not exceed 10% of the capacity, the voltage must be increased up to 14.4 V. Charging time will take about 20 hours.

Initially, using the regulator, a current equal to 1/10 of its capacity is set. After a few hours, this value will begin to decrease automatically to prevent the electrolyte from boiling. When the car battery is fully charged, only 200 mA (self-discharge current value) will be supplied to its terminals. The battery with the “charger” connected can remain in this state for as long as desired without any damage to itself.

A deep discharge in 90% of cases means that a maintenance-free battery has failed; the automatic charger is not able to revive it. It is worth noting that with the help of an automatic charger you can charge not only a maintenance-free car battery, but also any other, provided that it is not deeply discharged.

If you urgently need to go, but the battery is dead

In order to start a car with a completely dead battery, just connect the charger for 10-15 minutes. In this case, you can set the current value to more than 10% of the capacity, for example, 10 A.

Modern automatic “chargers” can be used as starting devices to make it easier to start the engine. To do this, you need to connect it to the battery, set the maximum amperage, wait 10-15 minutes, and then, without turning it off, start the car engine. After the engine has started, the driver needs to drive at least 10 km so that the generator can at least slightly recharge the battery for the subsequent successful start of the engine.

If you don’t have a charger at hand, you can simply “light it” from another car using wires. In this case, after connecting the “crocodiles”, you need to wait a little so that the car battery absorbed some energy. Otherwise, when you try to turn on the starter, almost all the current will be spent on charging the dead battery, and you will not be able to start the engine.

Many people think that charging and discharging Apple devices is exactly the same as other tablets, but things are different. This technique differs in its use and care. It’s a pity that owners of Apple products only think about this when they notice how long it takes to charge the iPad.

We have long been accustomed to the fact that a new device needs to be completely discharged and charged several times in a row. This tactic is good for phones with nickel batteries, which have a “memory effect” of the charge point, but is unacceptable for lithium ones, which can be recharged at any time. It is recommended to never discharge it below 10%. This way you can protect your device’s battery from premature failure.

New versions of Apple tablets use an improved version of the battery, but some owners have questions about why it takes so long to charge. With the addition of new functions and an increase in the gadget's memory, it requires much more energy than other tablets. It takes several times longer to charge it.

Does the charging process lengthen each time, and the active operating time of the gadget decreases? It is worth contacting an experienced specialist who will conduct high-quality diagnostics and identify the causes of the malfunction.

In our service center you can use the free diagnostic service. It is useless to “guess from the tea leaves” when your gadget requires urgent repair.

Causes of the problem and how to fix it

Why does my iPad charge slowly? The reasons may be different:

using an uncertified charger or USB cable;
purchasing an inappropriate charging model or cable;
using an adapter from the “American” input to the “European” one;
constant discharge of the battery, which is highly not recommended;
long-term inactivity of the iPad.

When your gadget does not charge completely, you should not think for a long time about the reason; it is better to immediately turn to professionals.

The need for qualified support and repairs may arise completely unexpectedly. This is why some clients contact the first service center without even inquiring about the professional reputation of its employees. To avoid mistakes, we advise you to contact our technicians who have extensive experience working with new products produced by Apple.

While the iPad Air is the best 10-inch tablet on the market, it does have its shortcomings.
Here we have collected all the most common problems associated with the iPad Air and their solutions.

You can find solutions to problems associated with the new iOS 8 firmware.

Problem: Tablet is charging slowly

Several iPad Air owners have been surprised by how long it takes to fully charge the tablet. The average charging time should be three to four hours, and if your tablet takes longer to charge, you should try the following:

Crutch:

While the phone is charging, try turning on offline mode and not using the device. You can also turn off your tablet completely.

Possible solutions:

Make sure you are using the original cable and charger that came with your iPad Air. Other chargers may have the wrong voltage, limiting the charging speed.
Use a charger and an outlet because USB charges the tablet more slowly.
Make sure the charger connectors are not dirty.

Problem: Safari tabs update

Safari tabs constantly refreshing is a problem that bothers many iPad Air owners. People with two or more Safari tabs open notice that switching between apps or even between different Safari tabs causes all tabs to refresh. You can find a lot of discussions about this problem on the Internet, and most people agree that this problem is related to insufficient RAM.

Crutch:

Hold down the Sleep/Wake button and the Home button until your iPad restarts.
You can try using a different browser. Some people prefer Dolphin, Atomic or Chrome.
You can improve the situation by going to [Settings > General > Reset] and deleting all settings, but the problem may occur again.
Try not to use many applications and open tabs at the same time.

Problem with Bluetooth connections

Sometimes you may encounter problems connecting to other accessories (such as a keyboard, speaker, or headset) using Bluetooth. Before taking any action, make sure Bluetooth is turned on in the settings menu.

Possible solutions:

Remove the paired device from the list of available devices and set up the connection again.
Try restarting your iPad Air and then try connecting again.
If possible, try rebooting the second device. Also, make sure it is charged.
Some Bluetooth devices can only have one active connection at a time, so in order to connect to it, you need to delete existing connections.

Problem: no sound

If you find that your iPad Air is losing sound, start by checking your volume settings and making sure you don't have headphones plugged in.

Possible solutions:

Double-click the Home button and close all open applications.
Try a reset. To do this, hold down the Sleep/Wake and Home buttons simultaneously until the iPad restarts and the Apple logo appears, this will take about 10 seconds.
Make sure the screen position is not the problem. Go to the [Settings > General] menu and check the “Side Panel Switch” section: there should be no check mark next to the “Mute” item.
Pull up from the bottom of the screen to access Control Center and make sure you have Silent mode turned off. You'll also need to turn off AirPlay and Bluetooth to make sure your iPad Air isn't connected to another device and isn't trying to play audio through it.
Try plugging and unplugging your headphones and cleaning the headphone jack to make sure nothing is stuck there.
Go to [Settings > General > Reset > Reset all settings] and check if the sound appears after that.
If none of the above helps, contact an Apple service center.

Problem: Camera won't load or freezes

Some iPad Air owners have already found that their camera refuses to work properly. For some it does not start, but for others it often fails.

Possible solutions:

Double-click the Home button and close the camera and other applications that may be using it. Restart your camera and check if that helps.
Restart your iPad Air.
Go to [Settings > General > Restrictions] and make sure you do not have restrictions on the use of the camera and other applications.
Go to [Settings > General > Reset], reset all settings and check if it helps.
You can also try doing a backup and restore. Go to [Settings > iCloud > Storage & Backups] and select Back Up. When the backup is ready, go to [Settings > General > Reset] and delete content and settings. Before restoring data from a backup, check if the camera is working.
If problems with the camera persist, contact an Apple service center - it may be a hardware error.

Problem: The touch screen is not responding to your input

Some people encounter problems with the iPad Air touch screen: periodically, either the entire tablet screen or a certain part of it does not respond to user actions, and sometimes the iPad Air registers touches that were not made.

Possible solutions:

Try pressing and holding the Sleep/Wake button until the slider to turn off your tablet appears on the screen. If the touch screen does not work and you cannot turn off the tablet using the slider, then press and hold the Sleep/Wake and Home buttons for 10 seconds to force a restart.
While iPad Air is turned off, gently wipe the screen with a damp microfiber cloth.
A protective film on the tablet screen can also cause the touch screen to malfunction.
Press the Home button three times or go to [Settings > General > Accessibility] and make sure you have the speaking feature turned off.
You can back up and restore your data using iCloud and the [Settings > iCloud > Storage & Backups > Back Up] and [Settings > General > Reset > Erase Content and Settings] menus.
If the problem is not resolved, then you better contact an Apple service center.

Problem: screen orientation does not switch

For some people, iPad Air gets stuck in landscape or portrait orientation and doesn't respond to user input.

Possible solutions:

First, make sure that the problem is not with your iPad Air's side switch: go to [Settings > General] and under Side Switch, uncheck Orientation Lock.
If this is not the problem, try restarting your tablet using the Sleep/Wake and Home buttons (hold down these buttons at the same time until you see the Apple logo on the screen - this will take about 10 seconds).
Finally, from the [Settings > General > Reset] menu, select "Reset all settings" and restart your tablet.

Problem: freezes, crashes and tablet reboots

For some people, the iPad Air periodically freezes, and sometimes spontaneously closes all applications and shows the home or black screen; For some, the tablet reboots itself. This usually happens when the application is open, or when you try to open it; however, neither the screen nor the Home button respond to your actions. Many people believe that the problem with the tablet is the lack of RAM.

Crutch:

To bring your iPad Air back to life, try restarting it. After this, the tablet should work, but there is a possibility that the problem will occur again.

Possible solutions:

Make sure that the problem is not due to lack of memory: go to the [Settings > General > Statistics] menu and close all unnecessary applications. Also, remove any apps from your tablet that you no longer use.
Make it a habit to periodically close all unused applications.
Try resetting the settings using the [Settings > General > Reset > Erase all settings] menu.
One of your applications may be causing the problem. To test this hypothesis, you can delete all applications and, after making sure that the tablet no longer freezes, begin to gradually restore them. After installing each application, you will need to test the tablet for a while to make sure it doesn't start freezing again. To make this process easier, you can back up and then delete your settings and content. After this, you can selectively install the applications you want.
Some people experience this problem with Bluetooth keyboards and other Bluetooth accessories. You can easily check if this is your case: unplug the accessory for a while and see if the tablet continues to freeze. If the problem is with the connected Bluetooth accessories, then you should contact the manufacturer for a replacement device.
If iPad Air continues to freeze and restart after you've deleted all your content and settings, contact your store or retailer for a replacement device.

Problem: Recovery takes years or doesn't work at all

You may also encounter problems when transferring your data to your new iPad Air. For some people this process takes too long, for others it stops altogether and suggests starting all over again.

Keep in mind that if you are transferring a large number of photos or videos, the recovery process will take a long time anyway.

Possible solutions:

If you think the process has stopped, try restarting your iPad Air. Some users note that when the tablet was turned off and on, the data recovery process started from where it stopped and went much faster.
Try rebooting your router.
If you have problems restoring from iCloud, try recovering your data using a cable and iTunes.
If this doesn't help, reset your iPad Air. First, back up your data and then go to [Settings > General > Reset > Erase content and settings]. After that, create a new account on your Mac or Macbook, give it administrator rights, restart your computer and sign in as a new user. Connect your old iPad to your computer and use iTunes to make a backup. When the copy is ready, connect the new iPad Air and try restoring again, but from a new backup.

Problem: overheating

All modern mobile technologies are prone to overheating under certain circumstances, because their relatively small sizes contain large batteries, 1080p screens, and processors work at their limit. A couple of horror stories aside, Apple has an excellent reputation in this area and the iPad usually only gets hot under heavy load. However, if the tablet gets too hot, a warning appears on the screen and it automatically turns off.

Crutches:

Cases and covers can cause the tablet to overheat. Try not to use them.
If you are in a hot place (for example, in a car parked in the hot sun), you may want to move to a cooler place or, if possible, turn on the air conditioning.
If you play resource-intensive games for a long time, then sooner or later the tablet will heat up. Try to take breaks during the game.

Possible solutions:

If the iPad Air heats up frequently and for no apparent reason (you are in a cool room and do not load it), then you should contact an Apple service center to have it checked.

Problem: Dark stripes and/or a yellow tint appear on one side of the screen

Some iPad Air owners are complaining about problems with the tablet's display. Reports report dark vertical or horizontal stripes that appear primarily on the left side of the display. We also encountered complaints about noticeable color differences between different parts of the screen - the left side takes on a yellow tint, which is clearly visible when the display is set to a white splash screen.

Solution: this problem is related to the hardware of the device, so the only thing you can do is get a replacement from the store where you bought it.

Problem: Safari crashes

Many people experience constant Safari browser crashes - most often this happens when they try to open new tabs in the browser; although for Safari to crash completely, sometimes a simple attempt to switch to another tab is enough.

Possible solutions:

Go to [Settings > Safari] and select "Clear history" and "Delete cookies and data."
Try restarting your iPad.
If that doesn't help, go to [Settings > iCloud > Storage & Backups] and select Back Up. When the backup is ready, go to [Settings > General > Reset] and delete content and settings. After this, restore the data from the backup.
Download Google's Chrome browser.

WiFi problem: Tablet won't connect to the network or the connection is very slow and keeps dropping out

This is a common problem among modern mobile devices. If your iPad Air won't connect to Wi-Fi or the connection keeps dropping, then you can try the following solutions to the problem:

Possible solutions:

Reboot your router and your tablet.
Turn iPad Air offline, go to [Settings > General > Reset] and select Reset Network Settings. Now disable offline mode and set up your connection again.
Check your router settings and update the firmware - you will find detailed information on how to do this in the instructions for your router. Try switching frequencies and other router settings that may affect the quality of the connection (including switching from automatic channel selection to a specific setting may increase the speed).
Try backing up and restoring your iPad using iCloud.

Problem: Battery life

This is another common problem with all modern tablets, but compared to its competitors, the iPad Air should have quite attractive battery life.

If your tablet is quickly draining even with light use, try the following:

Possible solutions:

Do you have any doubts about some resource-intensive application? If you have a specific application installed that is causing a lot of problems, then check if there are recent updates for it. After using this application, always close it to prevent it from consuming unnecessary energy.
Try to force restart your device by holding down the Sleep/Wake button and the Home button at the same time until you see the Apple logo on the screen.
If your iPad has cellular connectivity, it can consume a lot of power when you're in an area with poor reception, searching for an LTE or 3G network. Try to turn off your cell phone when you don't need it.
Backup and restore your iPad Air using iCloud.
If the situation does not change, and one charge of your tablet is not enough for 9 hours, then this may be a hardware problem. In this case, try contacting an Apple service center.

If the iPad quickly discharges, then it becomes inconvenient to interact with it - you constantly have to think about the charge level and keep the charger with you. However, this is not the only problem: many users are also interested in why the iPad takes a long time to charge and then quickly discharges?

Fast discharge

If the iPad begins to discharge quickly, then the reason for this may be:

Battery wear.
Installing a new version of iOS.
Active use of 3G, LTE.
Geolocation enabled.
Suboptimal settings.
An energy-consuming application is running in the background.

Typically, the user can cope with rapid battery discharge on his own. But if there is a sharp drop in battery life, you should contact a service center - the battery may need to be replaced.

Troubleshooting

If your iPad begins to discharge quickly after installing a new version of iOS, then do not take any action. This is a common issue that will be fixed in the first update. This has happened before, and each time the media and ordinary users panicked, demanding answers from Apple developers. The answer came quickly enough in the form of a bug fix.

Another reason is the active use of mobile data. Operating time up to 10 hours is indicated for surfing when connected via Wi-Fi. On cellular networks, the iPad lasts up to 9 hours, but most often the value drops to 8 hours. Therefore, if you are not using the cellular data module, do not forget to turn it off.

In addition to 3G and LTE, a lot of energy is consumed by the geolocation service, thanks to which the iPad determines its approximate location. Some programs that use geolocation can consume up to 30% of the charge in an hour. To disable a service:

Open settings.
Go to the "Privacy" section.
Go to the "Location Services" submenu.
Leave applications that really need geolocation enabled.

You can disable all services, but then you will not be able to use navigators. However, this does not prevent you from looking at the route on the map if you already know where you are.

There are also simply energy-consuming applications that take up many percent of the charge without any geolocation. To calculate them, follow the path Settings - General - Statistics - Battery Usage. Assess which programs cost the most energy. If you can refuse to use them, then remove these applications. Or at least close them completely so they don't run in the background.

It would be a good idea to tweak the system a bit, optimizing power consumption. The first is brightness adjustment:

Open settings.
Select the "Wallpaper and Brightness" section.
Reduce brightness or turn on automatic settings.

The next step is to reduce movement. You can enable it in the “Universal Access” section in the main settings. Finally, disable background content updating. You can also do this in the main settings. These steps will help answer the question of why your iPad discharges quickly and eliminate this problem.

Slow charging

If your iPad charges slowly and then discharges quickly, this could be due to:

Using an uncertified charger or USB cable.
The charger does not match the iPad model.
Using an adapter for the “American” input on the “European” model.
Battery wear.
Problems with the power controller.

You need to understand that the tablet takes longer to charge from USB than from a wall outlet. In addition, if the iPad has been inactive for a long time, even after connecting the charger it will not turn on immediately - it takes some time to accumulate the required charge level to continue working.

To speed up charging, try charging your device while it's off, or use some power-saving tips.

If you know what to do when your iPad is quickly draining, you can significantly reduce the load on the battery. Also try the following tips:

Turn off unnecessary notifications in settings.
Enable auto-lock with a minimum interval of two minutes (Settings - General).
Disable Bluetooth and other communication modules.

All of the above steps will be meaningless if you are using a non-original or damaged charger, or the iPad has problems with the battery and power controller. Therefore, first of all, make sure that there are no hardware faults that require repair at a service center.