Programs for working with disks in dos. Programs for working with hard disk partitions. Disk drive emulation program DAEMON Tools

We talked about how to create a bootable AOMEI PE Builder Live CD. In this article, I decided to tell you how to partition a hard drive using Windows and the free AOMEI Partition Assistant Standard Edition program.

Why share a hard drive at all? Many laptops and computers are sold with an unbroken hard drive, i.e. exists on disk only one sectionC: for the system and data and additional service sections for programs from laptop manufacturers.

There is a saying: “Don’t put all your eggs in one basket.” The same is the case with your hard drive in a computer, where your operating system (Windows XP, 7, 8, 10) and your data (documents, photos, music, movies and other data) stored on one partition Your disk. This is not good, because if there is an error on the C: partition (C: drive), all data on this partition is at risk, including your data. Secondly, when reinstalling Windows, if you have only one partition, you need to copy all your data from this partition to another place, which takes considerable time if the volume is large and there is not always an external hard drive or a large flash drive where this data can be copied. And thirdly, it is always convenient to have two or more partitions (disks) for separation systems and data. In this article, I will tell you and show you how to divide your hard drive into two partitions (drive C and drive D). There is no particular difficulty in this, but you need to be careful, as there is a risk of losing data, but there is always a risk of losing in our lives but if you read this article to the end, everything will become clear even to a child. But it will be better if you create a data backup in advance, as I described how to do this. So let's get started...

How to partition a hard drive using meansWindows

Friends, to partition a hard drive using Windows you need to go to “ Computer management" In Windows 8, to do this, right-click in the lower left corner of the screen and select “ Disk Management»

In Windows 7, go to the menu “ Start" and right-click on “ Computer" and in the context menu select " Control", then select " Disk Management»

The window “ Disk Management" We see that the hard drive of our computer (laptop) is divided into partitions. In this case, into two partitions: reserved by the system (350 MB), on which Windows download files are located, and system partition C: (24 GB), on which the Windows system is installed.

Your disk may be divided into three or even four partitions (depending on the laptop model), this does not change the essence, since these partitions are most likely inaccessible to you and are used for utility programs of laptop manufacturers.

We are interested in section C: (marked in red in the photo), we must divide it (split) into two parts (section C: and section D:)

Don’t be surprised that in the photo I have a small hard drive (25 GB), since I am showing the whole process on a virtual machine where a hard drive of this size is installed, while for you all actions will take place on a physical computer or laptop. But this does not change the process of partitioning the hard drive. All pictures are clickable.

Right-click on section C: and select “ Compress volume...»

The system polls the hard disk volume to determine the space for compression

In the next window indicate the size compressible space in MB, that is, we indicate how much we will compress the partition so that we can then allocate this space for a new disk partition and press the button “ Compress" We mean that the size of the compressed space is indicated in MB (megabytes), so if you want, for example, to create a new partition of 250 GB (gigabytes), then multiply this figure by 1024 (in 1 GB - 1024 MB), we get 250 * 1024 = 256000 MB.

We also take into account that the system may not give us so much space, since it is already occupied by data.

And one more thing: standard Windows disk management tools can become stubborn and not give as much space as you “ask” for, although you have it free. This can be caused by a number of reasons, one of which is fragmentation of data on this partition. In this case, you need to use special disk management programs, one of which I describe Further In this article. Let's read, don't get distracted :)

After compressing the partition, we see that now we have partition C: it has become smaller and additional unallocated space has appeared...

Now we need to create a partition from this unallocated space; to do this, right-click on it and select “ Create a simple volume...»

The Simple Volume Creation Wizard window appears, in which we click “ Further»

We indicate the size of our volume in MB and click “ Further»

Note:

We assign a letter to our new partition (disk). Click " Further»

Let's format our new section with the option " Quick formatting", click " Further»

We see that the wizard has completed creating the volume (partition) with the parameters that we set at the beginning.. Click the button “ Ready»

We see our two partitions in the disk management window: the reduced partition C: and the new partition E:

Voila! Let's go to " My computer"and we see our created additional disk

This is how you can partition a hard drive using Windows, but this method is not always suitable or does not always work properly, so we will look at another option for managing hard drives, this is the multifunctional and free program AOMEI Partition Assistant Standard Edition. With it we will do the same thing and in addition I will show its other main functions.

How to partition a hard drive with a free program

To install the program AOMEI Partition Assistant Standard Edition, go to the official website of the program: and click “ DownloadFreeware»

Click the button " Download Now»

The program will begin downloading to your computer. After downloading, run this file to install

Installing the program is simple, see the screenshots (pictures are clickable)…

To scroll through the pictures, click " Back" or " Forward»

After installation, run the program AOMEI Partition Assistant Standard Edition

Main program window

We see that the C: partition (C: drive) is large and you can “unfasten” the second partition from it. Usually for drive C: a partition of 60-150 GB is enough, I usually leave 80 GB.

Now what are we going to do. We will shrink the C: drive (change the partition), and use the freed up space for a new partition (D: drive). What do we need for this? This program is both a bubble and attentiveness.

So, right-click on section C: and select “ Resize partition»

Enter a new partition size. To do this, “grab” the right circle of the section with the left mouse button and move it to the left... Or indicate the size of the section in numbers in the field “ Partition size»

About the same as in the photo below. I changed the size of partition C: to 80 GB. Click " OK»

Now in the main program window we see that our disk has unallocated space for a new partition(s). Let's use this 🙂 and create a new partition in this disk space. To do this, right-click on the unallocated space and select “ Creating a section»

We indicate the size of our new partition, the program by default offers all the free space, select the drive letter and click “ OK»

Note: If you want to create more than one partition, then indicate the desired partition less than the recommended maximum, and use the rest of the space for one more partition.

To apply all these actions, you need to click the " Apply»

The window “ Deferred operations", where the program shows what operations it will perform on our hard drive before reaching the final result. If you agree with the actions of the program, click " Go»

The program requires a reboot, agree and click “ Yes»

After rebooting, the program waits 10 seconds. We do not press anything during this time. If you want to cancel, press any key...

Let’s make sure again, go to “ My computer"and rejoice!

Well, did you like the free version of the program? AOMEI Partition Assistant Standard Edition?. I like it. In addition to the fact that the program can divide disks, I will list a number of its main functions:

• Migration of the operating system to SSD/HDD drives;
• Increase, change, move, merge sections;
• Copying a disk/partition;
• Creating, deleting, formatting partitions;
• Creating a bootable CD;
• MBR recovery;
• Convert from MBR to GPT disk and back without data loss;
• Partition recovery;
• Disk surface testing;
• Aligning partitions and speeding up disks, especially SSD disks;
• Converting the FAT/FAT32 file system to NTFS

The program supports all types of storage devices: HDD/SSD hard drives with MBR/GPT disk partition styles, RAID arrays, flash drives.

Here is my video on how to partition a hard drive using the free program AOMEI Partition Assistant Standard Edition

Competition “Like - get a key”!

Friends, there is paid version programs, . In the paid version of the program, in addition to the standard functions described above, additional functions are available:

• Converting a partition from primary to logical and vice versa;
• Distributing free space from a partition to another partition;
• Creating and working with dynamic disk partitions;
• Convert a dynamic disk to a basic disk;
• Changing the partition type;
• Changing the hard drive serial number;
• Free technical support

Full list on the page:

It just so happens that I have 3 license keys for the program AOMEI Partition Assistant Pro Edition cost 32 $ (near 1800 R. for May 2015) and I want to arrange for you contest and draw these keys among your readers!

The conditions of the competition are simple:

1. You need to click just below on one of the social networking buttons

1. In the comments, provide a link to your social network profile.

Summarizing:

June 6, 2015 I'll play these 3 Keys among those who clicked on one of the social buttons. networks (shared information about the draw) and showed this profile in the comments.

I will assign a serial number to each participant. The selection of winners will be determined randomly using a random number generator on the service www.randstuff.ru/number/ .

Each participant will accept no more than one “ Laika” on one social network. There will be three winners. Each person will receive one license key.

The winners of the competition will receive license keys for the program AOMEI Partition Assistant Pro Edition and will be able to fully use all the functions of this wonderful program. Well, have we started? Who is first? 🙂

Good day.

Questions regarding the operation of the hard drive ( or as they say HDD) - always a lot (probably one of the most numerous directions). Quite often, in order to solve this or that issue, the hard drive needs to be formatted. And here, some questions are superimposed on others: “And how? With what? This program does not see the disk, which one should I replace it with?” etc.

In this article I will present the best (in my opinion) programs that help cope with this task.

Important! Before formatting the HDD with one of the presented programs, save all important information from the hard drive to other media. During the formatting process, all data from the media will be deleted and it is sometimes extremely difficult to restore something (and sometimes even impossible!).

"Tools" for working with hard drives

Acronis Disk Director

In my opinion, this is one of the best programs for working with a hard drive. Firstly, there is support for the Russian language (for many users this is fundamental), secondly, it supports all Windows operating systems: XP, 7, 8, 10, thirdly, the program has excellent compatibility and “sees” all disks (unlike from other utilities of this kind).

Judge for yourself, you can do “anything” with hard disk partitions:

• format (in fact, for this reason the program was included in the article);
• change the file system without data loss (for example, from Fat 32 to Ntfs);
• resize partition: very convenient if, when installing Windows, you, say, allocated too little space for the system disk, and now you need to increase it from 50 GB to 100 GB. You can format the disk again - but you will lose all the information, and with the help of this function you can change the size and save all the data;
• combining hard disk partitions: for example, we divided the hard drive into 3 partitions, and then thought, why? It’s better to have two: one system one for Windows, and the other for files - they took it and combined it and didn’t lose anything;
• Disk Defragmenter: useful if you have a Fat 32 file system (with Ntfs - there's not much point, at least you won't gain in performance);
• change drive letter;
• deleting partitions;
• viewing files on disk: useful when you have a file on your disk that is not deleted;
• ability to create bootable media: flash drives (the tool will simply save you if Windows refuses to boot).

In general, it is probably unrealistic to describe all the functions in one article. The only drawback of the program is that it is paid, although there is time for a test...

Paragon partition manager

This program is quite well known, I think that experienced users have been familiar with it for a long time. Includes all the most necessary tools for working with media. By the way, the program supports not only real physical disks, but also virtual ones.

Main features:

• Using disks larger than 2 TB in Windows XP (with this software you can use larger capacity disks in the old OS);
• Ability to control boot of multiple operating systems Windows (very important when you want to install another Windows OS in addition to your first one. For example, to test a new OS before finally switching to it);
• Easy and intuitive work with sections: You can easily split or merge the required partition without losing data. In this sense, the program works without any complaints at all ( By the way, it is possible to convert a basic MBR to a GPT disk. Regarding this task, there have been a lot of questions lately. );
• Support for a large number of file systems- this means that you can view and work with partitions of almost any hard drive;
• Working with virtual disks: easily connects a disk to itself and allows you to work with it as with a real disk;
• Huge number of backup functions and restoration (also very important), etc.

EASEUS Partition Master Home Edition

An excellent free (by the way, there is also a paid version - it has several additional functions) tool for working with hard drives. Supported OS Windows: 7, 8, 10 (32/64 bits), there is support for the Russian language.

The number of functions is simply amazing, I will list some of them:

• support for different types of media: HDD, SSD, USB flash drives, memory cards, etc.;
• changing hard disk partitions: formatting, resizing, merging, deleting, etc.;
• support for MBR and GPT disks, support for RAID arrays;
• support for disks up to 8 TB;
• the ability to migrate from HDD to SSD (however, not all versions of the program support);
• the ability to create bootable media, etc.

In general, a good alternative to the paid products presented above. Even the features of the free version are enough for most users.

Aomei Partition Assistant

Another worthy alternative to paid products. The standard version (and it is free) has a bunch of functions for working with hard drives, supports Windows 7, 8, 10, and has the Russian language (although it is not installed by default). By the way, according to the developers, they use special algorithms to work with “problem” disks - so there is a chance that your “invisible” disk in any software will suddenly be seen by Aomei Partition Assistant...

Key Features:

• One of the lowest system requirements (among software of this type): processor with a clock frequency of 500 MHz, 400 MB of hard disk space;
• Supports traditional HDD hard drives, as well as newfangled solid-state SSDs and SSHDs;
• Full support for RAID arrays;
• Full support for working with HDD partitions: merging, splitting, formatting, changing the file system, etc.;
• Support for MBR and GPT disks up to 16 TB in size;
• Supports up to 128 disks in the system;
• Support for flash drives, memory cards, etc.;
• Support for virtual disks (for example, from programs such as VMware, Virtual Box, etc.);
• Full support for all the most popular file systems: NTFS, FAT32/FAT16/FAT12, exFAT/ReFS, Ext2/Ext3/Ext4.

MiniTool Partition Wizard

MiniTool Partition Wizard is free software for working with hard drives. By the way, it’s not bad at all, which only shows that over 16 million users use this utility in the world!

Peculiarities:

• Full support for the following OS: Windows 10, Windows 8.1/7/Vista/XP 32-bit and 64-bit;
• Ability to resize partitions, create new partitions, format them, clone, etc.;
• Convert between MBR and GPT disks (without data loss);
• Supports conversion from one file system to another: we are talking about FAT/FAT32 and NTFS (without data loss);
• Backup and recovery of information on disk;
• Optimizing Windows for optimal performance and migration to an SSD drive (relevant for those who are replacing their old HDD with a newfangled and fast SSD), etc.;

HDD Low Level Format Tool

This utility does not do much of what the programs listed above can do. In general, it can only do one thing - format the media (disk or flash drive). But it was impossible not to include it in this review...

The fact is that the utility performs low-level formatting of the disk. In some cases, restoring the functionality of a hard drive without this operation is almost impossible! Therefore, if no program sees your disk, try HDD Low Level Format Tool. It also helps to delete ALL information from the disk without the possibility of recovery (for example, you do not want someone to be able to restore your files on a sold computer).

In general, I have a separate article about this utility on my blog (which describes all these “subtleties”):

PS

About 10 years ago, by the way, one program was very popular - Partition Magic (it allowed you to format the HDD, split the disk into partitions, etc.). In principle, you can still use it today - only the developers have stopped supporting it and it is not suitable for Windows XP, Vista and higher. On the one hand, it’s a pity when they stop supporting such convenient software...

That's all, good choice!

The hard drive stores all the files on your computer. The operation of each program and even the operating system itself depends largely on the operation of your hard drive. Therefore, it is important that it is in perfect condition and optimized.

Optimizing your hard drive in Windows 7

Disk optimization is a complex process that involves several steps. These steps differ depending on whether you are using an SSD drive or an HDD drive.

Advanced Disk Cleanup in Windows 7

The first step in optimizing disk performance should be cleaning it. Temporary files and other garbage accumulate on the disk over time and slow down its performance. To remove them, we will use the Disk Cleanup system utility. We do the following:

In addition, you can delete additional files in the “Clean up system files” section. But that's not all. You can access advanced disk cleanup by entering the command at the command prompt. For this:

Disk defragmentation in Windows 7

Defragmentation of the hard drive is the basis for its optimization. If over time your drive begins to work slower than before, and the response when opening files and launching programs has become significantly faster, then your hard drive needs to be defragmented. This process itself consists of moving file fragments towards each other for faster access to them. The need for defragmentation arises when these pieces, during active use of the disk, end up being written to different parts of the disk.

During the defragmentation process, all red areas will appear nearby, providing quick access to the file

Disk defragmentation should be done as needed. Before defragmentation, you should allow the utility to analyze the fragmentation of all partitions and issue a report. If the share of fragmented files is 10% or more, then it is worth defragmenting them, but if it is less than 10%, then you can postpone defragmentation.

By default, automatic defragmentation is enabled in the Windows 7 operating system. It is set to Wednesday and turns on at night. However, depending on your computer work schedule, this may not be enough or the defragmentation process may be interrupted by you. In this case, you need to start it manually. This is done as follows:

It is worth mentioning that defragmentation is a rather long process. You may have to wait for several hours.

Video: how to defragment a disk on Windows 7

Optimizing an SSD on Windows 7

If you have an SSD drive, the situation is slightly different. It does not require defragmentation, and the system takes this into account. Automatic defragmentation will not occur when using an SSD drive. But in the case of such a drive, there are a number of other actions that can help increase the speed of the disk. And instead of manually setting up an SSD drive, it will be easier to use a special program - SSD Mini Tweaker.

After downloading the program from the Internet and downloading it, do the following:

The complex setup of your SSD drive has been completed. Of course, you can configure most of these options yourself, but it will take much more time. And you can also get information about each option that this program changes if you read the help data.

In the help you will find information about all SSD settings

Video: how to configure a system for an SSD using SSD Mini Tweaker

Disk Management utility

To configure the disk, you may need to access Disk Management. With its help, you can change the drive letter, divide the drive into virtual volumes, or, conversely, merge them together, which can be convenient for creating a separate partition for the operating system. In the future, this can help avoid losing important data and provide the opportunity to format the partition without the risk of deleting necessary files.

To interact with the disk, use the context menu: it is called up by clicking the right mouse button

To open the Disk Management Manager in Windows 7, just call the “Run” menu by pressing the Win + R key combination and enter the command “diskmgmt.msc” there.

Enter the command "diskmgmt.msc" and click "OK"

Actions in the dispatcher itself are performed mainly using the context menu. That is, just select the required disk and call up the menu by clicking the right mouse button.

Hard drive bug fixes

Let's figure out how to solve the most common errors that can occur with your hard drive.

The disk is defined as dynamic foreign (unspecified)

If in the manager you find that the disk is not defined as basic, but as dynamic with the annotation “undefined” or “foreign”, then most likely you will not be able to access the data on this disk.

Dynamic foreign disk will not work properly

This error can be corrected using special programs. To fix it, we will need to convert the dynamic disk back to a basic one, and this can be done using the free TestDisk program or the paid Acronis Disk Director. The capabilities of a paid program, of course, are much wider, and we will use its example to analyze this process. Do the following:

Of course, if the problem occurs on the disk with the operating system installed, you will not be able to access it. The solution here is simple - insert the disk into another computer as an additional one and perform all the actions you need, and then return it to its place when the disk is restored.

Video: working with Acronis Disk Director

Windows 7 has detected a hard drive failure

If, during any check, the system displays a message about problems with the hard drive, the first thing you should do is create a backup copy of the necessary files. While your drive is still functioning, copy all the necessary files from the drive to another drive or upload them to the cloud. This may help you salvage these files later if the problems get worse.

You can determine which disk you have a problem with by carefully studying the error message. The letter designation of the virtual disk partition will be indicated there.

At the bottom of the notification you will see a drive letter

The error could occur for the following reasons:

• The problems appeared directly with the drive itself. This may be due to physical damage or contamination. In this case, it is recommended to take your drive to a service center for diagnostics and troubleshooting;
• problems with the operating system. If certain system files are damaged by viruses, the error may appear on its own without any reason from the disk. In this case, it is recommended to scan the system with anti-virus programs, and then restore damaged files using the installation disk.

Regardless of the cause of the problem, the best thing you can do is back up your files beforehand. If the error message continues to appear and you want to get rid of it, you can disable the disk diagnostic system. This is done as follows:

Formatting a disk to install the Windows 7 operating system

To make the disk work more efficiently, when reinstalling Windows, it is recommended to format it, that is, completely clear the disk of files on it. You can format the disk directly during the installation of Windows 7. Be sure to make backup copies of all necessary files, since formatting will completely delete them. To start formatting:

Thus, formatting is carried out quickly and without any special frills. In addition, it is possible to perform formatting using special programs. For example, this option is available in the Acronis Disk Director program mentioned above. The program must be written to disk, and the disk itself must be selected as the boot device. This can be done in the Boot BIOS menu or by pressing the corresponding key when turning on the computer (depending on the version of your BIOS).

Install CD/DVD as the first Boot device

After the disk with the program is loaded, do the following:

Disk programs

There are many programs that can help you optimize, clean, or do other things with your drives. Let's look at the capabilities of some of them.

CCleaner disk cleaning program

Disk Cleanup involves removing temporary files and installed applications of the user's choice. A good cleaning program can delete your browser cache and temporary files of various programs, and perform system diagnostics. And one of the best programs in this area is CCleaner. This program has the following features:

• automation of system cleaning;
• completely harmless and safe cleaning of temporary files, as well as analysis of registry damage and its correction;
• works with all popular browsers.

The program's interface is simple and convenient, suitable for beginners who want to regularly clean their computer of junk. In addition, the free version of the program is not reduced in functionality and has the same capabilities as the paid one.

CCleaner will help you configure startup applications, which will also speed up your computer.

CCleaner is a popular disk cleaning program

Video: CCleaner and its main functions

Hard drive cloning program EaseUS Disk Copy

In this case, cloning means transferring information from one disk to another. This can be extremely useful when reinstalling the system. EaseUS Disk Copy is an excellent free solution for this task. It is different:

• the ability to work with any operating system;
• support for disks up to terabyte in size;
• high cloning speed;
• simple interface for novice users;
• support for dynamic disks.

In general, it copes well with the task for which it was created, and its only serious disadvantage is the lack of Russian in the program.

EaseUS Disk Copy - disk cloning program

Recovering disk partitions using Starus Partition Recovery

If a hard drive partition is damaged, one of the special recovery programs - Starus Partition Recovery - can help. She does this job well. The main features of this program:

• deep disk scanning for damage;
• recovery of partitions that have been damaged or deleted;
• recovery of information on any type of media;
• comprehensive disk analysis.

The program is considered simple and effective among users.

Starus Partition Recovery can recover damaged partitions of your disk

Disk drive emulation program DAEMON Tools

If you are planning to reinstall the system, you cannot do without a flexible tool for creating virtual disks. DAEMON Tools Lite or another version of DAEMON Tools will help you create an installation disk or create virtual disks. The program also makes it possible to create several virtual drives at once and use them simultaneously.

This program is easy to use, and the limitations of the free version of the program are not too noticeable.

DAEMON Tools - a program for creating and using virtual disks

Video: review of DAEMON Tools Lite

It's important to know how to configure your hard drive to work efficiently. The disk optimization process is not a one-time process, and actions to improve its performance must be carried out from time to time throughout the life of the device. Now you know how easy and simple it is to improve the performance of your drive with the Windows 7 operating system.

Paragon Partition Manager 14 Free is a free program that will allow you to easily manage your computer's hard drives. The main function of the program is to partition the hard drive into partitions.

The program interface is in English, but simple and will be understandable to any user. The program has many different features, the main ones are available in the free version and should be sufficient for home use. If you want to use the program “to its fullest,” you must purchase a license.

Download the free version of the program from Yandex.Disk by clicking on the link below. Run the installation file and go through all the suggested steps - the process is very simple.

After installation is complete, launch the program on your computer. You can use the program either in simple mode, or select the mode for advanced users.

In simple mode, the program appears as a quick launch menu. It allows you to launch product components, access the help system, and go to the home page. To open the main program window, click on the “Partition Manager Free” button.

From the quick launch menu you can perform the following operations with the hard drive: “Create New Partition” – create a new partition, “Resize Partition” – change the size of the partition, “Format Partition” – format the partition, “Delete Partition” – delete the partition, “NTFS- HFS Convert” – convert the file system of the selected partition.

Go to the main program window. The disk map is displayed here. The color of the disk - blue, light green - depends on the current file system. On the right you can see information about the selected disk: drive letter, volume label, type, file system, amount of used disk space. There you can also select the operation that needs to be done with the hard drive.

If you want to return to the previous view of the program, click “Express Mode”.

To create a new partition on the selected hard drive, click “Express Create”.

Next the Master will ask you to choose "Partition Creation Method", that is, select the amount of space for the new partition. I have two methods available, yours may be different - it all depends on the condition of the hard drive.

As a result, a new partition will be created on the hard drive. To save the settings, click “Apply”.

It is better to create a new partition on your hard drive manually. To do this, right-click on the hard drive and select “Move/Resize Partition” from the context menu.

Now select the amount of memory for the new partition. If you select “Free space after”, the new partition will be created after the partition from which it is created. Click “Yes”.

Now right-click on the created partition and select “Create partition” from the context menu.

To finish creating the new partition, click Apply.

Using Paragon Partition Manager 14 Free, we partitioned the hard drive. This is done quickly and there should be no difficulties.

Rate this article:

EaseUs Partition Master Free 12.9 – a program for partitioning a hard drive into partitions. This software will help you create local disk partitions directly from the program window. You don't have to do this through the BIOS or reinstall Windows.

When purchasing a computer, there is often a situation where only one local volume with an operating system is created on the computer, which occupies the entire hard drive memory. But for ease of use, it is correct to store system files separately from others. EaseUs Partition Master will help you divide your hard drive into partitions.

Features of the EaseUs Partition Master Free application

When you first launch it, the program scans your hard drive to detect the amount of free memory and local disks. The main interface window will display scan information. That is, local disks, if present, and the remaining unallocated memory area. Below, in the form of a progress bar, the used and free memory on the disks is displayed.

The main features of the program are provided with separate buttons for quick access to them. These are: Create/Resize Disk, Delete, Connect, Format and Copy. EaseUs Partition Master has the ability to convert MBR disk to GPT and vice versa without data loss.

Each operation can be canceled before it begins. And if you are confident in your actions, then when you click confirm, a window with a progress indicator will appear. Depending on the selected operation, it will last from several to ten minutes.

The program also has functions for data recovery and creating a boot disk. This software is free and you can download it without registration, completely free of charge.

Specifications:

Version: EaseUs Partition Master Free 12.9
Russian language
Status: free
Author: EaseUs
System: Windows All
Size: 27.8 Mb