home Programs

Windows 10 won't install error code. If Windows cannot be installed on this disk. Windows Update reset script

Hello everyone, dear friends! Every user who has used Windows XP will tell you that even a novice user can install new versions of the operating system from Microsoft. The process has really been simplified, so now you only need to know the specifics of setting priority in the BIOS.

If you encounter a problem during installation, then you have already dealt with the priority. In this material I will talk in detail about emergency situations that you may encounter during the installation process. I will describe the errors briefly, but at the same time I will try to touch on the solution to the problem. As practice shows, there can be a lot of errors; below we will look at the most “popular” of them.

Technical characteristics of a personal computer or laptop

The Windows 10 operating system is quite demanding, so if your hardware does not meet the minimum requirements, then at a certain stage of the installation an error will appear. If you bought a computer in the last 5 years, then it definitely meets the minimum requirements. But if we are talking about a PC or laptop with a processor frequency of less than 1 GHz, RAM of less than 1 GB and a hard drive that cannot accommodate 50-60 GB of information, then it is better not to try to install the latest versions of the operating system.

It is possible that Windows 10 will be installed on a weak PC, but the system will perform terribly. Most likely, you won't even be able to run the program. If we are talking about a modern, but budget option that does not work on older systems, then it is better to opt for the tenth version. It is already known that Windows 10 demonstrates higher performance than Windows 7 and 8. And there are more drivers in the top ten, so you can save time searching for software. Windows 10 also has a tablet mode, which makes working with netbooks that have a fairly small screen diagonal much easier.

1. Trying to install a pirated version

It is no secret that in the CIS countries users rarely choose licensed software. Sometimes an unsuccessful build of “ten”, which you downloaded on the first torrent tracker you came across, may simply not be installed on your computer. Some users choose pirated builds for their modified appearance, and the absence of the need to pay for the OS also plays an important role. But the cracked version rarely demonstrates the same security and stability as the licensed copy.

Today it is extremely difficult to find a pure “pirated” version. For some reason, builders make many changes to the operating system: some software is removed, visual effects are replaced with alternative ones. If you still decide to take a risk and install a pirated system, then carefully study the description for it - it is present on all trackers. But don't forget that you can upgrade to Windows 10 completely free.

2. Faulty drives

We are talking about CD/DVD drives and USB inputs. Modern computers no longer have disk drives, only USB inputs remain. But if you own a PC or laptop that still has a CD/DVD, then it’s worth checking that the boot disk was written correctly. Also, the computer will not read information from a damaged or low-quality disk. Today, it is best to choose a USB drive to install the operating system.

The screenshot above shows a tool for recording an operating system on a flash drive - Media Creation Tool. You can download the application on the official website - here is the link http://www.microsoft.com/ru-ru/software-download/windows10 This is an official utility from Microsoft that will allow you to transfer your operating system to a USB drive in a few clicks.

3. Circular installation process

The first part of installing the operating system is done from media, most often from a flash drive. After rebooting the computer, the process continues from the hard drive. After the first reboot, you need to remove the flash drive so that the PC or laptop boots from the hard drive. Before starting the installation, you must set the following priority: the flash drive comes first, the hard drive comes second. This is what it looks like in practice:

If the system is installed “in a circle”, then you need to manually set the priority from the disk. When using a DVD, it is easier to avoid a circular installation, since confirmation with a specific key on the keyboard is required to continue the installation. Most often this is the message “Press any key to boot from CD” - the system asks you to press any key to confirm booting from the disk. After the first reboot, you do not need to click anything - then the installation will automatically continue from the system disk.

Common errors and their explanations

Below is a small list of the most common errors that appear during the installation of the operating system:

- 0x8007025d and 0x80070003 - these errors indicate that there are malfunctions in the boot sector. In this case, it is worth formatting the hard drive, perhaps the problem will disappear.

- C1900107 - usually this message pops up when you try to install the system directly from the desktop. If the user does not have administrator rights, the update or installation will be canceled.

- c1900101-2000c - one of the most common errors that appears when you try to update Windows 7 or 8 to the tenth version. To avoid having to deal with the image and antivirus for a long time, it is recommended to install the operating system from scratch.

- 0xc190010 and 0x20017 - appear during an update due to a conflict between the new system and an antivirus or other applications responsible for computer security. Disable or uninstall such programs, and then try updating again.

To summarize today's article: as you can see, there are quite a lot of errors. Sometimes you can solve the problem yourself, in other cases you need to go to a service center, since an error during installation may indicate a malfunction in the hardware of your personal computer or laptop.

Why might this happen? Some time ago, the Microsoft organization released a new version of its OS called Windows 10.

For those who have licensed versions of previous operating systems, the transition to the tenth version is offered free of charge. But many people have a problem with this.

What to do in this case?

The Windows 10 icon does not appear and the OS does not install

The first reason why Windows 10 may not install is quite rare, but it can still happen.

It's possible that the Update Center icon on your laptop is simply hidden.

To check this, you need to do the following:

Click on “Start” and select “Control Panel” from the menu
Next, select “Notification Area Icons” from the new list.
Check if the Windows icon is in this menu. If it is not there, you need to look for other reasons why the update center does not start and you cannot update your computer or laptop.

Missing a required update

Your computer may not have the correct update installed. It's called KB3035583.

In order to check its presence on your computer, you need to go through “Start”, “Control Panel” and “All Controls” to “Windows Update”.

Then click on search and see if what you need is there.

You can install it yourself, for this you need:

In Start, type “Command Prompt” and press Enter.
You need to right-click on the search result and run it as an administrator by selecting the appropriate item.
In the window that appears, write Dism /online /get-packages |findstr 3035583. Press “Enter”.
After this, the computer should install the required update. Restart your PC.

Other Possible Causes

Due to carelessness. You might have forgotten to turn on the Internet. Check to see if this is actually true. It’s a small thing, but it’s precisely because of it that the update center on the laptop will not function.

Unlicensed version. Your computer (laptop) may have a corporate or unlicensed (pirated) version of Windows installed. In this case, the update center on the laptop “will not know” about Windows 10.
In this option, the icon will not appear; the only way out is to change the operating system.

System requirements. It’s very simple - you need to simultaneously hold down the button on the keyboard with the “Windows” icon and the “Pause Break” key.
Requirements for Windows 10 can be found on the Internet.

No updates. You can upgrade your device to Windows 10 when your device is running Windows 7 Service Pack 1 (SP1) or Windows 8.1 Update.
Update disabled. Automatic system updates may be disabled on your computer. You can enable it as follows:

Go to “Start”, select “Control Panel”, then “Administrative Tools”, then “Services”.
In this menu you need to enable autorun via Update Center.
Next, go to “Start” again, then click “Control Panel”, then “Update Center”, click on “Adjust settings”, and then click on “Install updates automatically”.

4. Restart your computer (laptop).

Helpful information:

We recommend using the program. This is a program that automatically checks the installation of new software and removes all checkboxes that subsequently install unwanted applications and extensions.

Compatibility issues

When upgrading to Windows 10, you sometimes receive a message that your hardware is incompatible with the new operating system. Despite the fact that the installation is carried out on a relatively new computer. To avoid this error, you need to work with the OS registry. The instructions are:

We have discussed this type of error, now we move on to another type of error.

80240020

80240020 is not just a number, but an error code that occurs during system installation. To get rid of this interference you need to do the following:

We move to the Windows\SoftwareDistribution\Download folder and completely delete all its contents.
Then we launch the OS console (command line) and execute the following command: wuauclt.exe /updatenow.
Then, go to “Windows Update” and launch the installation of Windows 10 as we did in the previous paragraph.

Error code 80240020 will no longer appear and the installation should be successful, unless, of course, some other error makes itself felt.

Source of error - SATA cable

Some users record this error in Windows 10: copying files during installation reaches 84%, and then the installation stops and, after rebooting, we see an error message on the screen with code 0xC1900101-0x20004. As it turns out, the SATA cable is to blame. It is enough to disconnect this cable from the CD drive and the installation of Windows 10 will go like clockwork.

In conclusion, here is another problem and a method for eliminating it. Some computers with a Pentium G3258 processor also do not allow for normal installation. The reason for this is that the BIOS settings are too loose, allowing overclocking of the processor. For fans of computer games, such settings are simply necessary, but during the installation process they can lead to problems. The problem usually occurs is C1900101-20017. Sometimes disabling one of the processor cores of a given model helps, but a more universal remedy is a correctly configured BIOS. You need to do as shown in the picture below.

Sometimes when installing Windows, including version 10, an error message is displayed on the screen. The text of the message is: “Windows cannot be installed on this disk.” In this case, the hard drive is displayed in the BIOS. It is also visible at the stage of installation of the operating system, where it could be divided into sections.

This problem occurs for two reasons:

the controller is disabled in the BIOS (AHCI mode);
The hard drive has a GPT volume.

Problem with AHCI mode

In addition to an error message informing you that it is impossible to install Windows 7 or 10 on this disk, if there are difficulties with the AHCI mode, the computer cannot boot from the selected disk. The reason is that the controller may be disabled in the BIOS.

The problem is solved as follows:

Problem with GPT format

Another reason for the impossibility of installing Windows 7 or 10 versions with the display of a similar message may be GPT - the hard drive partition format.

Until recently, all hard drives were the same type. The only partition style was MBR. Over the past few years, manufacturers have been gradually switching to producing hard drives with the GPT format. But the boot files from the OS are not modified for the new formats, and as a result, the error described above appears during installation.

The MBR (master boot record) is the program code and data required to pre-start the computer. They are located in the initial marked sector of the hard drive. The MBR starts after the initial BIOS analysis of the performance of all devices. Its main function is to determine the location of the files that are needed to boot the OS.

GPT is a new standard for the volume table layout format. A standard firmware interface for computers was also developed, replacing the BIOS. It is called UEFI (Unified Extensible Firmware Interface).

The problem occurs because the OS installer cannot install Windows on the specified partition due to the fact that the partition table does not suit it.

There are 2 methods to solve the problem:

installing the system on a similar disk;
Converting a partition to MBR.

The choice of method should be determined by the following rules:

if your computer supports the UEFI interface and you need to install a 64-bit OS (for example, Windows 10), then it is recommended to use the first option. Checking the presence of a UEFI interface is very simple. Graphics mode with mouse control indicates the presence of UEFI;
If the computer was manufactured several years ago, has a BIOS and requires installing a 32-bit operating system from MicroSoft, then you should convert GPT to MBR.

Using MBR limits some features, such as:

their volume cannot exceed 4 TB;
The maximum number of volumes on the HDD is limited to 4.

Installation of Windows 7, 8 and 10 on GPT

Problems when installing an OS on a GPT volume usually arise for those who want to install Windows 7, 8 and 10.

To install the OS on a GPT volume, you must meet 2 conditions:

install a 64-bit system (for example, Windows 10);
boot in EFI mode.

If the first condition is not met, you must prepare a bootable UEFI drive.

But in most cases, only the second condition is not met. Therefore, it is better to immediately go into the BIOS and check the settings.

There are two parameters to set in the BIOS:

enable UEFI boot;
switch the operating mode from SATA to AHCI.

After saving the settings, you can install the OS on your computer. The mistake will not happen again.

Converting GPT volumes to MBR

There are several options for converting volume style. Let's look at them in more detail.

Converting to MBR when installing Windows via the command line

This method is optimal for use in situations where installing an OS such as Windows 7, 8, 10 is not feasible due to the GPT volume type. It can also be useful not only when installing the OS, but also during the normal operation of the OS for converting non-system partitions.

It should be remembered that when converting partitions, all information from them will be lost. Therefore, it is recommended to save everything important on an external storage device in advance.

To change the style of volumes from GPT to MBR via the command line:

run the command line in Windows as a user with administrator rights;
to display a list of hard drives connected to the computer, enter the commands “diskpart” and “list disk” in sequence;
select the disk to change the style with the command “select disk D”, where D is the disk number;
Then two scenarios are possible.
1. perform a complete disk cleanup using the “clean” command. In this case, all HDD volumes will be deleted;
2. You can delete HDD volumes one at a time using the commands “detail disk”, “select volume” and “delete volume”;
start converting the disk to MBR with the “convert mbr” command;
exit Diskpart by selecting “Exit”. Close the command prompt. After this, it is recommended to continue installing the operating system. This error message will no longer appear.

You can create volumes on the HDD by selecting “ Set up disk».

The volume style change is complete.

Changing partition style from GPT to MBR using Windows Disk Management

An alternative method for converting volumes requires a normally functioning Windows 7, 8 or 10 operating system on a personal computer. You can only convert a disk volume that is not a system one.

The sequence of steps to convert a HDD volume is as follows:

Utilities for changing partition style

In addition to the standard methods for converting HDD volumes provided by Microsoft developers, you can use third-party hard drive volume management utilities, such as

Video on the topic

Most Windows 10 users have encountered a problem where, when starting the computer, a blue screen appears with information that an error has occurred (without any information about the factors that caused it).

Let's look at the main problems that arise when turning on a computer with Windows 10, and ways to solve them.

CRITICAL_PROCESS_DIED

Probably, most often, users see a blue background on the screen with a smiley face conveying a negative emotion, and a message that an error occurred when starting Windows.

For the first time, try restarting Windows 10, and when this does not help, restore it using one of the latest rollback points.

At this stage, it is important to know what actions most likely caused the problem when starting Windows 10, in order to resume it the first time, and not roll back endlessly, choosing an older restore point each time. If you updated the OS or installed a driver/program before rebooting or shutting down the PC, select the restore point created by the system before performing this operation.

Boot Failure

This error indicates that it is impossible to detect a boot record on the logical system disk.

There are several solutions here:

check that the priority of boot devices in the BIOS or UEFI is correct (perhaps the computer starts booting from a connected flash drive);
Next, we check the SSD or system partition for bad sectors;
We restore the Windows bootloader using System Restore, booting from the installation disk.

Let’s look at the last option in more detail, because not all beginners understood what we were talking about.

We boot the computer from a removable bootable media or CD with Windows 10 installation files.
On the screen with the “Install” button, click on the “System Restore” link.

Select the additional boot options item, which is responsible for troubleshooting and troubleshooting.
In the menu with additional Windows 10 startup options, select the item indicated in the screenshot so that the installer will restore the boot record.

Operating system wasn't found

The error described in this section appears when the computer starts, immediately after its hardware is initialized. Its cause is hardware or logical damage to the drive from which the system is trying to read information, because it was not possible to find and extract information from the bootloader.

Try disconnecting and reconnecting the media using another free cable. Check the surface of the media for bad sectors, which may cause you to be unable to access the system information contained in them. In this case, restoring Windows 10 is not recommended - the best solution would be to reinstall the OS and completely format the partition. Then the future system partition will be checked for the presence of bad sectors and then corrected or reassigned.

Other common mistakes

Let's briefly look at other, less common problems that arise during the launch of the "ten".

Error 0x800F0923 - one of the drivers or software products used on the computer is incompatible with the current Windows update/edition.

If restoring the system followed by updating all installed drivers/programs (or removing products that are incompatible with the current update) does not help, contact Microsoft support.

Error code 0x80200056 - most likely, the update process was interrupted and the computer needs to re-run the update to correct the functioning problems.
Black screen when turning on computer - boot into safe mode and enable low resolution mode.

Next, turn off each of the video adapters one by one and restart the PC to determine the problem. If you use one video card, update it, and if you cannot connect to the Internet, roll back the drivers for it.

(Visited 8 224 times, 1 visits today)