home Programs

What should I do if I see a black screen instead of the Windows XP desktop? Black screen after boot Black screen when booting windows 7

When loading Windows 7, a black screen and mouse cursor occurs due to a variety of factors, each of which sometimes defies logical explanation. When loading Windows 7, a black screen and mouse cursor may appear suddenly, and the user may not even be aware of the mess going on in the file system. Before taking active steps, I recommend delving into the root of the problem and understanding where this illness comes from in the first place.

So, when loading Windows 7, a black screen and mouse cursor occurs, most often, due to We are all human and we are all not sinless, we catch viruses left and right, as a result of which Windows is gradually cut off. At first, the operating system may work slowly, then it will generally start to show a black screen. Viruses, as soon as they get into the Windows kernel, are immediately thrown into system folders and begin to create ridiculous chaos there. It’s not hard to guess that the only true prevention is installing an antivirus. By the way, not every antivirus will be useful.

In my memory, I have encountered quite civil computers with a similar problem. When loading Windows 7 there was a black screen and mouse cursor and nothing could be done about it. In some cases, Windows still boots, although only a couple of hours after turning it on. The true cause of this disaster was the world famous Avast is an antivirus that blocks vital system files, in particular Explorer.exe.

Actually, the file presented above is the main reason that when loading Windows 7, the black screen and mouse cursor haunt the user. Explorer.exe is responsible for running Explorer and everything else that should be displayed on the desktop. This file may “die” or fail to run for various reasons - viruses, conflicts with other programs, as well as due to the “natural aging” of the operating system, as a result of which the user loses the rights to run this file.

There is also the use of pirated Windows 7. In such cases, when loading Windows 7, a black screen and mouse cursor appear after the next system update. The system can download a special update that verifies the authenticity of Windows. Of course, if you are on a pirated Windows, then this can happen to you.

The likelihood of problems with video card drivers is extremely small, but it is still worth mentioning. The unpleasant formula “outdated video card + too new drivers” can lead to a black screen with a mouse cursor. This can also include the use of firewood, downloaded from unknown sources, developed by unknown people.

The most unpleasant thing is faulty hardware. Here it is already difficult to determine where exactly the epicenter of the problem is located. This could be a failure of RAM dies, problems with the hard drive, and occasionally problems with the north and south bridges.

Black screen with mouse cursor - first actions.

Let's start with the simplest. Before turning on the computer, remove all USB drives from it - flash drives, hard drives, Wi-Fi or 3G adapters. Often, the system refuses to start due to unknown conflicts between the hardware and the software level. For the future, I recommend

Let's go through safe mode.

We turn on the computer, we see a black screen and a mouse cursor and when Windows 7 loads, we wait 5-10 minutes and if nothing happens, then we proceed to action. As we said in the previous paragraph, the root cause of the black screen and working cursor is problems with the Explorer.exe file. First of all, press the key combination Ctrl+Alt+Del, after which the Windows Task Manager should appear on top of the dark background. I think you already have an idea about this dispatcher and know how to work with it, but still - repetition, mother of learning.

The first tab displays all applications currently running; in our case, this tab should be empty. Go to “Processes” and try to find a worker process called Explorer.exe. When Windows is 100% working, it will look like this:

Well, if when loading Windows 7 a mouse cursor appears against a black screen, then this process will not be in the list. On many forums you can come across “criminal” advice from experienced programmers about this problem, for example, rewrite a piece of the kernel in C++. We don't need this!

The most effective option is to start Windows from safe mode. By the way, get used to this bun, since most actions with a faulty system can be solved only by this method. So, restart the computer and press the F8 key. You will see this picture.

Once you get to this menu, select “Safe Mode with Command Line Support.” After this, the system will boot with the usual CMD utility.

Actually, the console in Windows is a wonderful creation that often comes to the rescue. We type Explorer.exe in the line, as in the example above. In this way, we will be able to overcome the black screen with the mouse cursor when starting Windows 7 and start the system in working order. However, subsequent launches in normal mode will again be accompanied by a dark screen and a single cursor. What do we do next?

War with antivirus.

Let's start with the antivirus. If you use Avast, we will need to remove it or reconfigure it. First of all, go to the antivirus settings, then “Protection is active” - “File system screen” - “Settings” - “Exceptions”. As we already said, Avast may block the Explorer.exe file, so we need to add it to the exclusion list. It will look like this:

Then we reboot and see what happens. If the black screen and mouse cursor do not disappear when you start Windows 7, then read on.

Activation of the operating system.

Let's return to the issue of activation. If, after starting safe mode, you see such a picture, then this is exactly our case.

This problem can be solved quite simply - you need to download the “Crack”. This is a kind of key that activates the pirate. Well, users of real Windows should not be afraid of this.

Debugging through the registry.

Let's assume that the black screen and mouse cursor when starting Windows 7 are due to viruses in the registry. Therefore, we will try to solve the problem manually. By the way, this method can be used both in normal and safe mode.

Open the task manager and click “New task”, after which the following input field will appear.

We enter the regedit command, after which the registry editor will open in front of us. Follow a similar branch as in the next picture.

Find the Shell file and double-click to open its settings. Delete the set value and enter explorer.exe.

Let's reboot. If the problem still does not go away, we will continue brainstorming.

System Restore.

The presented function is a universal remedy for all problems. Let's take the path of least resistance, start through safe mode, then Start - all programs - standard - utility -

The first window does not contain anything useful, click “Next”.

Now we have to select a point to which the state will be rolled back. This is a kind of return of the system to a working state; if you like, you can draw an analogy with time travel, may Marty McFly be with you. We select the desired point and move forward.

Review the contents of this window and click “Finish”.

A final warning will pop up, which you must agree to.

The recovery itself will begin when Windows restarts. As soon as the system starts, you will see the following message:

So, Windows functionality has now been completely restored. In most cases, the problem of a black screen with a mouse cursor when starting Windows 7 is solved in this way.

Driver rollback and fraudulent software.

Let's remember once again about bad drivers that you should get rid of. In general, automatic driver rollback is performed during system recovery, although this process can be completed much faster. So, enter through safe mode, then open the device manager (Computer - system properties - device manager).

We find our video card, and then right-click to open properties.

Go to the driver tab and select rollback. Then, after a reboot, the video card will work with the previous drivers. If the next startup was completed without a black screen, then the problem is solved. If not, you should remove the driver and try again.

Dead iron.

Finally, let's get back to the most unpleasant part. Let's say you completely reinstalled Windows, but it doesn't do any good. Now I propose to dig deeper into the hardware. Try turning on the computer using a combination of RAM chips. You can also check your RAM programmatically. Read about how to do this in the article “” in paragraph number 5.

In other cases, you should check the performance of the remaining hardware - processor, video card, hard drive. This can be done by simply changing the iron - old to donor. In the case of a hard drive, you can check it with Victoria 4.47b. You can read how to do this in paragraph 4 of the article “Why the computer freezes,” the link to which is above, and also watch the video below.

Conclusion.

That's all, actually. Remember that the most effective method is reinstalling Windows, but even if this does not help, you need to look for the source of the problems in the system unit. Good luck!

When critics try to explain that Windows 7 is not such a perfect platform, they usually nod to the blue screen of death, which has become a common problem. But now a new scourge has appeared in the camp of Windows users - the black screen of death, the so-called BlSoD.

What is it? When you turn on the computer, after it starts loading, the screen goes blank, as if it was disconnected from the network. Sometimes the monitor does not turn off and the cursor is visible, but nothing can be controlled.

There were especially many complaints about black screens after Windows 7 and MS Office updates in November 2009. Microsoft undertook an investigation, but in the end their representative said that their updates had nothing to do with it, and since then the problem has been ignored.

Causes and consequences of a black screen

Apparently, the main reason is viruses and malware, software failures or even hardware failure - users often encountered such problems back in the days when Windows itself did not exist.

How serious is the black screen when loading windows 7? Can it be compared to the blue screen of death? Hardly, these are two fundamentally different problems. A blue screen at boot usually indicates an irreparable hardware failure, and a black screen of death is easily fixed; in the worst case, you just have to reinstall Windows 7 from scratch.

How to get rid of the black screen of death?

Black screens are a common problem in Windows 7, so the internet is full of tips to help you regain control of your PC. Some of them are simple, while others lead to reinstalling the system. We will highlight the most effective of them. Remember - before trying any of them, make sure that the monitor is working (to do this, launch the BIOS by pressing F6), remove the disks from the drives. Listen to see if the built-in speaker makes any sounds that indicate a breakdown (their explanation can be found in the documentation of the motherboard).

Loading Last Known Good Configuration

This is a standard boot function, needed just for situations such as a black screen. Every time you turn on your computer, Windows keeps a log where important system parameters are saved. And these options can be applied if the computer does not start for some reason (i.e. you see a black screen when loading windows 7). In case of mild OS failures, this method often works.

Free up all disk devices and restart your computer.
Press and hold the F8 button. The boot options screen appears.
Use the arrow keys on your keyboard to select “Last Known Good Configuration (Advanced)” and press enter.

System Restore

Sometimes problems with loading Windows 7 occur after installing some programs or careless actions. System Restore is similar to the previous one, but it is a more flexible tool. You can select a specific date of a successful configuration and try to restore the system, returning to the state when the black screen of death had not yet appeared.

Don't worry about losing documents created after the restore date - they won't be affected.

After turning on the computer, without waiting for the boot to start, press the F8 key and select safe mode in the boot options using the arrows.
Open the recovery utility. To do this, click the start button, type “system restore” in the search bar and press enter.
Select the item of the same name from the list of results.
Follow the program's instructions, select the date when the computer started normally as a return point. The computer will restart.

Creating a new user

Sometimes the black screen of death occurs when the Windows 7 user profile is corrupted. Turn on the computer again in safe mode and create a new one.

Click on the start button and open control panel.
On the right side of the panel, in the “accounts” menu, click on the “adding and removing user accounts” item.
Select “create an account” and follow the wizard’s instructions. It is better to choose administrator privileges.
Restart your computer.

Reinstalling video drivers

Some users note that in their case the problem was caused by a problem with ATI Radeon video card drivers. However, computers with video chips from Nvidia sometimes also show a black screen of death.

Go to Control PanelSystem and SecuritySystem. To do this, you can press the key combination win+pause.
Go to Device Manager (the button on the left side of the window).
Select your video card from the list and call its properties (double click).
In the “driver” tab, remove existing drivers.
Go to the manufacturer's website and download the latest drivers, then install them. If you do not have Internet access, install them from disk.
Restart your computer in standard mode.

Black screen fix

If the tips listed above did not help and the failure is not caused by video drivers, try using the free Black Screen Fix program (current version 3.0.5.28). It was released almost immediately after complaints about a black screen when loading Windows 7 appeared and helps in a large number of cases.

If you do not have access to the Internet in safe mode, then you will have to run it from an external drive, flash drive or disk.

The program is very small and has virtually no interface. All you need to do is run fixshell.exe and click on Yes.

This program should be run every time you install Windows 7 from scratch, so that a black screen does not appear in the future - the program does not cause any side inconveniences.

If all else fails

If you have not been able to eradicate the computer boot problem on your own and the black screen of death has not gone away, you can turn to professionals or take advantage of the warranty (if there is one). Repair centers have the opportunity for deeper diagnostics, without the risk of damaging files and equipment.

If you are not going to trust your computer to strangers and you are sure that the components are in good condition, simply reinstall Windows 7. This will take no more than an hour, and the black screen of death will definitely disappear.

Good day, we continue to fix emerging Windows OS bugs, and today we will try to solve the problem of an empty desktop after a reboot. The problem is that the black screen that appears after loading does not allow the user to log into the system. As a result, it seems to the user that only a manual restart is required. Calling Task Manager using Ctrl + Alt + Del leads to nothing. The maximum that the user discovers on the Malevich square is a “live” mouse. The error may accompany the user from download to download, which is downright annoying. And, most likely, the error lies in wait for owners of Windows 10, and most often owners of laptops, so we start from there. However, things are not simple for desktop owners either; moreover, they are deprived of some energy-saving functions, which are also worth checking. So, if you encounter a download error, check out the article.

What's the problem?

Yes, there is a sea of them, comrades. Here is a list of the most common reasons.

The problem is often seen that you have either an integrated video controller from Intel or another discrete video card. Windows does not have time to automatically redirect the video signal to the “correct” output, out of bewilderment it switches to what it thinks is a second monitor. Yes, she sometimes thinks there are two of them. And she thinks so, partly thanks to the mentioned video card. A similar problem has already been described in an article with a similar title. Windows black screen, but in more recent builds the emphasis of the question has shifted somewhat. If the problem appeared precisely after connecting a second monitor or TV, disconnect it.
If you notice that a black screen appears precisely after turning off the computer, and not after a reboot, the reason for this is 100% the fast boot function coupled with a broken file hiperfi.sys. The first one is to disable, the second one is to be deleted. More about this below or in the article
The next reason is the slow File Explorer. Probably not of their own free will, but because of the newfangled functions and applets that appeared in Windows 10. If you had known what exactly of the settings in the Start panel was slowing down, you would have discarded it at the installation stage, otherwise... I strongly recommend that you immediately read the article. And get ready - you will have to work in Safe Mode, where many functions are not fully disclosed.
Another possible reason is Windows boot record changes. Apparently, the system leaves some task for the next session, but cannot do this at the time of loading. After you turn off Windows when the black screen appears, the task is reset and the system boots as usual. Because a black screen after loading Windows most often awaits owners of a multiboot system. In my experience, the problem was successfully resolved (or delayed) after. However, as soon as the boot process returned through the Grub bootloader (the second one is Linux), the black screen problem sooner or later returned as well.
I will continue with fiction. Who waits for how long? Believe me, in fact the black screen after loading with the cursor on the screen is 80-90% oh-oh-oh-very long system loading. On one of my computers, I waited as long as 5-6 minutes for it to fully launch. The problem sometimes goes away after installing a good optimizer and defragmenting the disk (if it has an HDD and not a solid state). If you encounter a problem again, give it some time - just make sure that the system does not boot at all (an indirect signal can be the end of the hard drive boot LED blinking). But if the system still shows itself, start with autorun. I'm not talking about Window, he won't tell us anything. Take a look at the program Autoruns for Windows from Russinovich. He appears in one of the options.

Black screen after loading: trying to skip it

Move your mouse until the cursor appears on the screen
click Ctrl + SHIFT + WIN + B
There may not be any visible changes on the screen, except that the mouse will be exactly in the center of the screen. However, you now just need to enter the required password if logging into your account requires registration
if nothing happens, try pressing Enter and reentering your password. The cursor will disappear from the screen for a while, which means that Windows is processing the entered registration data. Sometimes there is a wait time of several minutes before Windows fully loads. However, if nothing happens and the mouse is still there, this is not our case.
If you still can’t log into Windows, take advantage of the opportunity to log into Safe mode or press repeatedly before loading Shift. In general, your task is to get into Windows. It is possible that you will have to turn off the computer several times again using the button.

Black screen after loading: trying to fix it

Well, try everything: there are a lot of manipulations...

Immediate update - this bug, as far as I know, has already been patched
In an open session, we immediately go to the power settings using:

powercfg.cpl

We are looking for a button on the left What the power buttons do and by clicking on it, go to Settings. If the buttons Shutdown options are not available, click the interactive link Change settings that are currently unavailable. Disable Enable Fast Startup and save the changes:

Now let's go to the console Windows (services.msc) and pick out one of them called Application Readiness, changing to Disabled:

time to check Autorun. Let's launch Autoruns for Windows as administrator and check several parameters. We are interested in tabs (1) Winlogon, in which we remove extensions, if any (do not delete, just uncheck). Such extensions have many dependencies, but are easily affected by all sorts of crap:

I have a single copy of the library: the splash screen with “Welcome” in the background

(2) Everything- the most useful of the tabs, which will show everything that starts with Windows in all its sections and services: from the scheduler and startup to menu items for additional commands (those that are launched by right-clicking). See:

All autorun sections are presented here - take your time to check them out

Looking ahead, I will say that in search of a solution to this problem, I simultaneously solved a lot of other things. For example, this particular utility showed me that my Windows scheduler was simply full of some tasks:

The rubbish was removed manually - the planner gave the location with a bang:

and finally, the reason for the misfortunes of many users:

the remains of the program from the Program Files folder were removed using

However. Keeping in mind the unsolvable task before starting Windows, check one more tab of the program just in case (3) Scheduled Tasks. It turned out that Window Scheduler was hiding something from me, to put it mildly:

I think there will be a lot of unnecessary things there too. Remove them little by little and check by rebooting. I guarantee that after these manipulations of “black windows” after rebooting or turning on Windows, your experience will decrease.

Further. Open Task Manager and in the list of Processes check RunOnce(if not, look in the list of services RunOnce.exe). Neither the first nor the second MUST BE running. If you see it, kill the process and stop the service by setting Manually. Rarely, but it works.
disconnect ALL USB devices while booting
Have you done any manipulations with Windows themes? used programs like UXStyle or StartIsBack? Have no doubt – your problem’s legs grow from here
Probably either the explorer process itself is broken File Explorer, or something in its logs prevents it from starting normally. And the only solution in this case is to launch the repair utility from cmd on behalf of administrator sfc/scannow. Checking the integrity of Windows files.
Reboot and check.

Weapon of last resort: reinstalling the video driver.

We are left with the last option. It helps often, you just have to know how to do it. Let's reinstall the video driver. Moreover, the reinstallation is not justified by the fact that you downloaded (or did NOT download) the latest version - you still need to stock up on the driver for the next step. The fact is that reinstalling the driver for any device entails resetting all settings, plans, parameters and services that are associated with it. And there may be “bad” or “badly” configured ones - those that cause a black screen after booting. Let me remind you of the procedure (the most useful and reliable is described in the article):

loading into Safe mode with network driver support
identify the device: right-click on the screen => Screen options => Graphics adapter properties

I download from the manufacturer's website
WIN+X=> Device Manager
Select an item Video adapters -> your_card
choose Remove device, check the box Remove driver programs and we agree:

reboot:

After rebooting, update the hardware configuration and point to the location of the driver for your card. If these are not drivers in their pure form, but an installer, run it. If this is not available, Windows will automatically download the appropriate one from its servers. As you understand, it’s not a fact that it’s suitable. So native drivers are sometimes the most basic way out of the situation. Although experience suggests that the problem described is a Windows problem.

That's all I wanted to say. We will report back based on the results, whether it helped or not.

Sometimes Microsoft OS users encounter a problem when After loading Windows only black screen and cursor mice. The symptom is quite well known - the system process “explorer.exe” cannot start. There may be several reasons: a virus or vice versa - an antivirus (Avast), problems with the hard drive, etc. Quite often fix black screen on startup you can do it in a minute without any third-party utilities.

As already mentioned in the title, the reason for this behavior is process startup error, which is responsible, among other things, for displaying the desktop, its elements and the panel with the Start button. In this recovery guide, we'll look at two popular reasons why When loading Windows you can see a black screen and cursor instead of a desktop. One of the reasons in some cases is the popular Avast antivirus, which, for reasons known only to him, blocks “ explorer.exe" In the second case, you will have to slightly edit the system registry. In both situations Windows operation is restored very easy.

Avast is the culprit behind the black screen when loading Windows.

So after Windows has booted, but on the screen there is only a black “Malevich square”, along which an “abstract cockroach” is running - the mouse cursor, do the following:

1. Press the world-famous combination of buttons “ Ctrl+Alt+Del" and select "Launch task manager" from the list.
2. After the task manager window appears, find in the list of processes “ avast"(Processes tab) and from the context menu (right-click on the process) select "Open file location".
3. You will see a window with a folder where Avast antivirus is installed. Find the “AvastUI” file in it and run it (double click or “Enter”). The main antivirus window should open.
4. Go to the tab “ Safety", in the list on the left select " Antivirus", and among the menu items that appear, click on " Behavior Screen».
5. Open Screen Settings and add to reliable processes « c:\windows\explorer.exe"(use the "Browse" button). We confirm our actions with the “OK” button.
6. Restart your computer: click " Ctrl+Alt+Del» and find the corresponding icon on the screen that appears.

If the Avast antivirus was the culprit, then after following the steps from the instructions for solving the problem black screen and mouse cursor when starting Windows– the next boot of the operating system should be successful. It is quite possible that the problem has already been solved by Avast developers, but the process of adding the program to the “trusted” ones may still be useful. Moreover, it is not known how the antivirus will react to the upcoming Windows 10.

In case you use another antivirus, then try to find in its settings a similar item for creating a list of “trusted”, “reliable”, “ignored”, etc. applications that should not be scanned by this antivirus. If the antivirus is to blame, then black screen with cursor when loading Shouldn't bother you anymore. Defender, which reacts so inadequately to popular programs, will most likely receive a corresponding update in the next few days (and maybe hours). It is quite possible that it will be received automatically if you have an Internet connection and the configured function for updating the antivirus over the Internet. Otherwise, it is recommended to download the updated version from the official website.

Not always errors and similar situations when Windows starts caused by antivirus. There may also be problems with the equipment. The review was recently published. But next we will consider a solution when, in the current situation ( Only the mouse cursor is on the screen) Incorrect Windows registry settings are to blame.

What should I do if when I start Windows, all I can see is a black screen and a mouse? We edit the system registry.

The first step is exactly the same as in the case of an antivirus: you need to open , use it to launch registry editor and check/correct a couple of Windows registry values.

1. Able black screen press the world-famous “Ctrl+Alt+Del” button combination and select “Launch task manager” from the list.
2. After the task manager window appears, in the top “File” menu, select “New task (Run)…”. The “Create a new task” window will appear. In the "Open" field, enter the command "" (without quotes). A Registry Editor window will open.
3. B left side window, go to the section (something like “folders” in Explorer) called “ HKEY_LOCAL_MACHINE" Expand it and go to the subsection " SOFTWARE" In the same way, get to the section “ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon».
4. On the right side of the window you will see a list of parameters. Find the option called " Shell" Its meaning there should be a line "explorer.exe". If this is not the case, then after double-clicking on it, set the specified value. In the event that the “Shell” parameter is missing altogether, then create it, by selecting “Create” – “String parameter” from the context menu of the “Logon” section. Specify the name of the new parameter (“Shell”) and then double-click the value (“explorer.exe”).
5. As in point 3, go to the “ HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Winlogon" Here's the right side should not contain the "Shell" parameter. If there is one, then you should delete it via the context menu or the “Delete” button on the keyboard.

The two methods above will help you restore Windows if, when booting, black screen and mouse cursor. Changing the “Shell” setting often indicates that the computer has been infected with a virus. It is quite possible that it has already been neutralized by the installed antivirus, but traces of its activity (change to “Shell”) could easily remain in the system.

Currently, a considerable number of Windows 7 users have encountered a new misfortune. This convenient operating system, capable of automatic updates, is quickly gaining popularity. But so far it’s really not as smooth as we would like. And such a problem as 7 is becoming more and more common. Often the problem begins to appear after one of the automatic updates. Although this version of events is unofficial, there is still a certain assumption on Microsoft's part.

However, Microsoft themselves persistently deny this fact and are still conducting research and are in no hurry to issue conclusions. And, most importantly, somehow help users resolve the problem. However, the security flaw allows malware to make changes to the system. Or rather, into the holy of holies, the registry. After such an intervention, the same infamous problem occurs when loading Windows 7.

The reason that causes a black screen when starting Windows 7

Independent experts have already conducted their own examination. During its course, it turned out that the main problem lies in some of the features of storing registry data that the new system has. The vulnerability relates to the Shell value. With some changes, it is not processed correctly, which ultimately causes the scary black screen when loading Windows 7. Wallpaper, taskbar, sidebars - nothing loads. In rare cases, you can only see the Explorer window, and only if it is not minimized. Otherwise, the latter will also disappear into obscurity.

Solution

How to fix the black screen when loading Windows 7? There are several ways to solve this unpleasant problem. Unfortunately, most of them turned out to be ineffective. The most popular option, which has successfully proven itself and has helped more than a dozen users, is as follows. A combination of three keys (Shift + Ctrl + Esc) should be called. It selects the command to execute a new task (file -> execute). After these steps, a window should open in which you need to enter the regedit command.

This command calls and allows you to view We will need the branch HKEY_LOCAL_MACHINE->SOFTWARE->Microsoft->WindowsNT->CurrentVersion->Winlogon. Its contents will appear on the right, where all you have to do is find the notorious Shell key and double-click on it with the left mouse button. Everything that should be in the window that opens after this is contained in a single value “explorer.exe”. Perhaps there will be meanings with other names. All of them can (and even need) to be removed.

If no extra values are found, the Shell key itself must be deleted and recreated. This is not difficult to do. In the area where the key was located, you need to right-click and open the corresponding menu. There will be a “create” option. We need to create a string parameter with a name similar to the remote key (Shell).

Black screen when loading Windows xp

This phenomenon is also not uncommon. The black screen here may occur after installing the third Windows update package (Service Pack 3). Or the first one, which they are trying to install on top of Service Pack 2. Incompatibility of some system elements causes similar problems when loading. The appearance of the downloaded image is the same as in the case of problems on Windows 7: a completely black screen without any icons, launchpad or background. All that remains is the Explorer icon.

The most common reason for a blank black screen to appear is the presence of dangerous viruses in the system. Elimination in this case is associated with ridding the computer of this scourge. The solution uses a small Prevx patch, which takes up only about 50 KB. The convenience lies in the fact that when launched, the program itself performs all the necessary actions. Sometimes the boot disk helps.

Another good utility is called Malwarebytes’ Anti-Malware. It is suitable for owners of any Windows operating system and will check their system for viruses. After all, even the best and most reliable antivirus program does not guarantee one hundred percent protection. Therefore, it doesn’t hurt to check the contents of your computer with a specialized utility to detect Trojan viruses.